[just_jo]

-------لزيادة الامان استخدم تشفيير الاتصال اللاسلكى-------------
و الخطوة دى حتى لا يتجسس عليك اى شخص ...... لان ممكن اى شخص لا يستطيع ان يخترق اتصالك لكن الان يستطيع ان يتجسس على المعلومات المرسلة و الراسلة من جهازك
عن طريق برامج الpacket sniffers

هناك نوعين من التشفير الاول لا تستخدمة : Wireless Equivalent Protocol (WEP)

و نوع شديد الخصوصية و انصحك تستخدمة : Wi-Fi Protected Access (WPA)

اختار كما فى الصورة الخاصية الpersonal



الخطوة الاخيرة توليد مفتاح لكل الاجهزة ليتعرف الروتر عليهم..

2. From the Enc.ryption Algorithms drop-down list, choose TKIP. In the Personal Key box, type a key between 8 and 63 characters in length. The longer it is and the more random the characters, the more secure it will be. Write down the key. You'll need to use this on each wireless PC on your network.

3. Leave the Group Key Renewal row at 3600. Click Save Settings. That applies the key to your network. Now, only PCs that use WPA enc.ryption and the key you just generated will be able to get onto your network.

Next, configure each wireless computer on your network to use WPA and the key you just generated. (Wired PCs don't need to be configured.)

For each Windows XP PC:

1. Click the wireless connection icon in the system tray, then click Properties, click the Wireless Network tab, highlight your network, click Properties, and then click the Association tab.

2. In the Network Authentication drop-down box, select WPA-PSK. In the Data Enc.ryption dialog box, choose TKIP.

3. When you do that, the box that reads "The key is provided for me automatically" is checked. Uncheck this box. Enter your WPA key in the "Network key" box, and type it again in the "Confirm network key" box.

4. Click OK and then OK again. Now the Windows XP PC can connect to your network using WPA enc.ryption.

In Windows Vista:

1. Select Control Panel --> Network and Internet --> Network and Sharing Center --> View Status.

2. From the Security type drop-down box, select WPA-Personal or WPA2-Personal, depending on your enc.ryption method.

3. From the Enc.ryption type drop-down box, select TKIP. In the Network security key box, type in the security key you used on your router.

4. Click OK. Your Windows Vista PC can now connect using enc.ryption.